Basic Description

We are Supplier, Exporter of Pressure Sensors MSI M5200 and our set up is situated in Pune, Maharashtra, India. The M5200 pressure transducers from the MicrofusedTM line of MEAS, with their modular design, offer maximum flexibility for different configurations. This latest series sets a new price performance standard for demanding commercial and heavy industrial applications. This series is suitable for measurement of liquid or gas pressure, even for difficult media such as contaminated water, steam, and mildly corrosive fluids.

The wetted material is made of 17-4 PH stainless steel and the transducer's durability is excellent with no o-rings, welds or organics exposed to the pressure media. The M5200 is weatherproof and exceeds the latest heavy industrial CE requirements including surge protection. The circuit is protected from reverse wiring at input and short circuit at output.

This product is geared to the OEM customer for low to mid volumes. MEAS stands ready to provide a custom design of the M5200 where the volume and application warrants. Additional configurations not listed are either available or possible. Please inquire for further information.



Technical Specification
Parameters Min. Typ Max. Units Notes
Accuracy ( combined non linearity, hysteresis, and repeatability )
-0.25   0.25 %F.S. BFSL
Isolation, Body to any Lead 100     ©500VDC
Dielectric Strength     2 mA ©500VAC, 1min
Pressure Cycles 1.00E+ 6     0-FS Cycles  
Proof Pressure 2X     Rated  
Burst Pressure 5X   20k psi Rated
Long Term Stability (1 year) -0.25   0.25 %F.S.  
Total Error Band -1.0   1.0 %F.S. Over compensated temperature range
Compensated Temperature -20   +85 °C  
Operating Temperature -40   +125 °C Except cable 105°C max
Storage Temperature -40   +125 °C Except cable 105°C max
Load Resistance (R L)   RL > 100k   Ω Voltage Output
Load Resistance (R L) < (Supply Voltage -9V) / 0.02A Ω Current Output
Current Consumption     5 mA Voltage Output
Rise Time (10% to 90%) <2ms (Voltage Output); <3ms (Current Output); Without Snubber
Wetted Material 17- 4PH Port, 316 Stainless Steel Snubber
Gage Pressure Reference Vent Under 1k psi, customer to ensure venting through mating connector
Bandwidth DC to 1 KHz (Typical)
Shock 50g, 11 msec Half Sine Shock per MIL - STD -202G, Method 213B, Condition A
Vibration ± 20g, MIL-STD-810C, Procedure 514.2, Fig 514.2-2, Curve L

Standard Ranges
Range ( psi ) Range ( Bar ) Gage Sealed Compound
0 to 050 0 to 3.5  
0 to 100 0 to 007  
0 to 200 0 to 014  
0 to 300 0 to 020  
0 to 500 0 to 035  
0 to 01k 0 to 070
0 to 03k 0 to 200
0 to 05k 0 to 350
0 to 07k 0 to 500
0 to 10k 0 to 700
0 to 15k 0 to 01k
Key Features
  • Heavy Industrial CE Approval
  • 10 V/m EMI Protection
  • Reverse Polarity Protection on Input
  • Short Circuit Protection on Output
  • ± 0.25% Accuracy
  • ±1.0% Total Error Band
  • Compact Outline
  • -40°C to +125°C Operating Temperature
  • Weatherproof


  • Industrial Process Control & Monitoring
  • Advanced HVAC Systems
  • Refrigeration Systems
  • Automotive Test Stands
  • Off - Road Vehicles
  • Pumps and Compressors
  • Hydraulic / Pneumatic Systems
  • Agriculture Equipment
  • Energy Generation & Management