Pressure Sensor Transmitter |
 |
Sunpro Instruments (I) Pvt. Ltd., offers MSI and SENSYM make Strain Gauge type Pressure Sensor in Differential / Absolute and Gauge Pressures. Having Plastic and Stainless Steel Enclosure PCB mounted as well as Mechanical Fitting available Power required 5 to 24 V DC and Out Put 0 to 100 m V, 0 to 6 V DC, 4 to 20 m Amp etc. is available. Pressure range 4'' of H 2 0 to 5000 PSI and about 500 different Models are available of various size and Pressure Ranges. Absolute Vacuum & Vacuum + Pressure compound sensors also available in new models for High Pressure up to 15000 PSI can be supplied in shortest time. Pressure controlling / Recording system can be supplied too & pressure calibrator comparison test pumps can be supplied.
We undertake calibration Job for PRESSURE / TEMP. / HUMIDITY / AIR VELOCITY & certification can be given traceable to NPL STD.
• One-piece EMI / RFI protected stainless steel construction.
• Isolated pressure transducer.
• 1% total Error Band, No leaks, No welds, No ‘OOO’ rings, No silicon oil Amplified output.
• Low pressure configuration.
• Hydraulic/ Pneumatic systems Off road mobile equipment
• Energy & water management Pressure Instrumentation
• Refrigeration equipment Agriculture Equipment
• Train braking system.
• Total error band < +/- 1% of FS (75-10,000PSI)
• Shock 50g, 11msec half sine shock per MIL standard 202F, method 213B, condition A
• Vibration +/- 20g MIL-STD-810C,Procedure 514.2, curve L.
• EMI/RFI Immunity EN 50081-2, EN 50082-2 (10V/M, 26-1000MHz) , EN 61326 (Effective July 1, 2001)
• Humidity 95 % RH, condensing.